How To Clean Rings At Home?

How To Clean Rings At Home?

Start by wiping the ring using a soft cloth and water. To remove stubborn stains, you can use jewelry-specific cleaning products. Keep in mind that precious metals react differently to chemicals. You should use different cleaning methods for each type of ring. Let’s see.

1. How to Clean Platinum Rings

Your platinum ring will lose its natural sheen over time due to wear and tear, regular hand washing, and the use of hand creams. You should clean it frequently, but take care not to scratch this hardy metal.

Warm Water and Soap

A mild soapy solution of mild washing liquid can be used to clean the platinum ring. This will keep it shining and beautiful. To remove any dirt or grime, soak the ring in soapy water for 30 minutes. Use a soft toothbrush to brush the ring. Rinse it in cold water. Let it dry completely with a towel or air-dry it.

2. How to Clean Gold Rings

Use the correct method of cleaning depending on the type of gold used to make your ring.

How to wash up liquid and water

This is a great way to clean the yellow ring that has been worn lightly. Use lukewarm water to mix the washing liquid and then soak your ring for between 15-30 minutes. This will quickly get rid of any grease and dirt.

Carbonation can be used to clean stubborn stains from your band if it is very dirty. Use a soft toothbrush, a cotton bud or a soft sponge to scrub debris off the ring. Rinse it with running water and dry with a soft cloth.

Dish soap and warm water

Use warm water to dissolve a few drops of dish soap. Then, place your ring in the solution. To clean the ring, use a soft toothbrush and rinse it under running water. Finally, dry the piece with a soft towel.


Beer is a great solution to clean a gold band that has lost its sheen. You can use a soft cloth to apply a small amount of light beer. Next, rub the ring surface gently. After you’re done cleaning, dry it with a soft cloth.

y cleaner Jewelry type
Gold Silver
14, 18, 24K Filled Plated Platinum Sterling Antiqued Plate
Jewelry wipes * * * * * * *
LaSonic * * * * * *
Sonic dazzle stik brush * * * *
Dazzle drops silver * * *
Dazzle drops advanced * * * *
Diamond dazzle stik * *
Liquid precious cleaner * * * *
Liquid delicate cleaner * * *
Liquid silver cleaner *
Quick cleanser * * * * * *
Gold cloth * * * *
Silver cloth

3. How To Clean Silver Rings

As you may know, silver ring can tarnish from light and air exposure. There are many ways to restore the shine of your ring.

Warm and Liquid Water Washing

To effectively clean your silver ring , mix warm water and washing up liquid. Use a sudsy solution to clean the ring. Then rub it with a soft, lint-free towel. The band should be rinsed with cold water and dried with a dry towel.

Dish Soap

Mix a few drops of dish soap in warm water, and then dip your ring in that solution. You can rub the tarnish off with a soft toothbrush. Rinse the ring in cold water, then dry it with a soft towel.

Baking Paste

Make a paste from one part water to three parts baking soda. Spread it on the wet ring. Rub the paste with a lint free cloth. Rinse it well and dry it with another lint free cloth.


Ketchup is an efficient but strange way to clean your tarnished Silver band. After soaking the ring in ketchup, rinse it off with warm water. Dry the ring completely.

Aluminium Foil

A silver band that has accumulated dirt and grime will need to be cleaned up. Put one tablespoon of baking soda in a saucepan and cover the pan with aluminum foil.

Place the ring in the pot. Wait for the baking powder, which will speed up the reaction between dirt and foil. After removing the ring, rinse it and dry with a towel.


To remove tarnish from your silver ring’s surface, use mild abrasives in every toothpaste. Use white toothpaste to clean your ring. Rinse it with warm water, and then dry it with a soft towel.

Silver Polish

This is a great solution to clean tarnished rings of silver and prevent future re-tarnishing. You can use a high-quality liquid silver polish or wipes such as Weiman Silver Polish. This will eliminate dark spots and protect your skin from future damage.

4. How to Clean Gemstone Rings

Keep in mind that there is no universal cleaner for different gemstones since they won’t react equally to heat, brushing, and chemicals.

Jewelry cleaner Stones Pearls Coral
Diamonds *Precious *Delicate Emeralds Opals
Jewelry wipes *
LaSonic * * * *
Sonic dazzle stik brush * * * * * * *
Dazzle drops advanced * * * * * *
Diamond dazzle stik * *
Liquid precious cleaner * * *
Liquid delicate cleaner * * * * *
Quick cleanser * * * * *

*Precious Ruby and Sapphire

*Delicate Opal, Genuine Amber Jadeite Malachite Lapis Lazuli Onyx, Onyx and Ivory


It can be used to clean hard stones such as diamonds. Let the ring soak in Alka Seltzer with water until it stops fizzing. Then wipe it clean with a dry cloth. Avoid using flavored Alka Seltzer, as it can contain dyes that could negatively affect the gem.

5. How to Clean All-Metal Diamond Rings

Water and soap

It doesn’t matter what metal your ring is made of, the best way is to use plain dishwashing soap with warm water.

It will usually take between 20 and 40 minutes to soak the ring. To remove any perfume, hairspray or makeup residues, use a soft toothbrush. Rinse the ring with running water, and then dry it completely.

Non-abrasive and chemical-free agents

Your diamond ring should be taken care of. You should use a non-abrasive cleaning agent that is free from chemicals. You will avoid any diamond discoloration.

6. How to Clean Gold and Silver Diamond Rings

You will need to use Windex and hydrogen peroxide in a 50/50 ratio for detailed cleaning of your gold or silver engagement ring . You can soak it for 10 to 15 minutes, then scrub the residue with a soft toothbrush. You can then rinse the ring in lukewarm water and dry it using a soft cloth.

7. How to Clean Silver Diamond Rings

A silver diamond ring is rare. However, it is possible to clean yours with a mixture of 2 tablespoons baking soda and 1/2 cup white vinegar. After soaking the ring for three hours, rinse it off with cold water and dry with a soft cloth.

8. How to Clean Rings with Other Gemstones

To restore the shine of gemstones such as rubies and sapphires, the dish soap and Seltzer solution are the best options. If necessary, you can use a soft toothbrush to brush the stone. Rinse the ring with running water, then dry it with a soft cloth.

9. How to Clean Pearl Rings

Mix a tablespoon of mild detergent and lukewarm warm water to make a sudsy solution. Allow your ring to sit in the mixture for 5-10 minutes. Use a soft toothbrush to remove dirt and then rinse the ring in warm water.

To remove any remaining pearl rings, wash them well with the same toothbrush but rinse it again. Let the pearl ring dry completely on a soft, absorbent towel.

10. How to Clean Costume Jewelry

To keep your costume jewelry clean, you can use a damp cloth soaked in a solution of water and dish soap. Rinse the jewelry well with warm water to remove any stains or accumulated impurities.

To prevent moisture from seeping into your setting, flip the ring upside-down. Avoid soaking the costume ring in water as the stone may be glued to it and could pop off.

Leave a Reply